Precautions and Assembly

• Examine the ionizer to check if it hasn’t been victim of any damage during the transit. If you find any anomaly, please contact your retailer.
• Place the device upside down ( solar panel side ) on a smooth surface.
• Take the mineral electrode ( Copper-Silver ) and screw it ( clockwise) on the unique screw place in the bottom hollow of the unit. Do it by hand, don’t use any tool.
• Take the spring and press on it as the same time as you lightly tighten clockwise against the circular central slot ( around the mineral electrode) until it fits against the bottom.
• Fit the spring by lightly stretching it until it is roughly at the same level as the mineral electrode, but without touching it.
• Take the plastic stop disc, lightly press it in the free side of the copper electrode by introducing its protruding axle in the opening of the electrode, and tighten completely. This stop disc prevents the electrodes from touching each other.
  
  

  Be careful ! The mineral electrode and the spring electrode MUST NOT touch each other, otherwise it will prevent the ionization to operate.

Do’s and don’ts

• Don’t blindly follow the advice of people who have no experience whatsoever with the Net'Eau® F60 Ionizer. This kind of advice is often influenced by the desire to sell chlorine or chemical products. Moreover, the pieces of advice often concern chlorine-based chemical products and don’t apply to ionized water.
• Adding an algicide product is useless, because the Net'Eau® F60 Ionizer is already doing the job !